- PT100 interface
- 4 Analog inputs
- 2 Analog outputs
- 4 Digital Inputs
- 8 Digital outputs
- Optional onboard PSU
- Supplied with standard mounting kit
- DIN mounting kit available separately
- Open source Python3 SDK
This expansion hat for the PI provides a single high speed RS232 port as well as some general purpose digital IO. It is ideal for home automation, or protocol conversion. The board comes with our SDK and some examples to get you up to speed quickly.
Specification
| Digital Outputs | x 8 High side |
| Max current per channel | 0.35 A |
| Voltage range | 2-24 V |
| Max switching frequency | >10KHZ |
| Inductive loads | Y |
| Technology | DARLINGTON, built in 350mA Current limit |
| Digital Inputs | x 4 |
| Voltage range | 2-24 V |
| Temperature | 1x 3 wire PT100 typical -50 to +200 Deg C range |
| Analog in | 0-10V or 0-20mA Jumper configurable (500R load) |
| Analog out | 0-10V @ 30mA |
| Power supply | Various configurations |
| Connections | 0,24V,5V terminals, |
| Onboard DCDC | 1A or 2A optional |
| Status LEDs | RUN,Fault and Field supply LED |
| Terminal blocks | 3.5mm |
| Wire range | 18-24 AWG |
| Compatability | Pi1-3 (requires 40 pin GPIO), Pi4 requires GPIO Extender kit |
| Kit Contents | PiIO PCB + Standard mounting kit |
| Kit Options | Onboard DCDCs / DIN Kit / GPIO Extender kit |
Support
General
Options
SDK
Tecnical Notes
